April 20, 2024

If you’re experiencing the DNS Server Not Responding error on Windows 10, you’re not alone. Let’s explore some solutions to fix this issue.

Recently, Fortect has become increasingly popular as a reliable and efficient way to address a wide range of PC issues. It's particularly favored for its user-friendly approach to diagnosing and fixing problems that can hinder a computer's performance, from system errors and malware to registry issues.

  1. Download and Install: Download Fortect from its official website by clicking here, and install it on your PC.
  2. Run a Scan and Review Results: Launch Fortect, conduct a system scan to identify issues, and review the scan results which detail the problems affecting your PC's performance.
  3. Repair and Optimize: Use Fortect's repair feature to fix the identified issues. For comprehensive repair options, consider subscribing to a premium plan. After repairing, the tool also aids in optimizing your PC for improved performance.

Understanding the “DNS Server Not Responding” Error

If you encounter the “DNS Server Not Responding” error on Windows 10, it could be due to various reasons such as network issues or configuration problems. To troubleshoot and fix this error, follow these steps:

Step 1: Check your internet connection by ensuring your router and modem are properly connected and that your device has internet access.

Step 2: Restart your router and modem to refresh the connection and eliminate any temporary glitches.

Step 3: Flush the DNS cache on your Windows 10 computer by opening Command Prompt (cmd.exe) as an administrator and entering the command “ipconfig /flushdns”.

If the error persists, consider resetting your TCP/IP stack, updating your network adapter drivers, or changing your DNS server settings to a public DNS like Google’s (8.8.8.8 and 8.8.4.4).

Checking Your Network Connection

  • Restart your router and modem:
    • Unplug your modem and router from the power source.
    • Wait for 30 seconds.
    • Plug your modem back in and wait for all the lights to stabilize.
    • Plug your router back in and wait for all the lights to stabilize.
  • Check physical connections:
    • Ensure all cables are securely connected to your modem and router.
    • If using Wi-Fi, make sure your device is within range of the network.
  • Reset your network adapter:
    • Open Command Prompt as an administrator.
    • Type ipconfig /release and press Enter.
    • Type ipconfig /renew and press Enter.

Restarting Your PC and Network Devices

To restart your PC and network devices to fix the DNS Server Not Responding error in Windows 10, follow these steps:

1. Restart your PC: Click on the Start menu, select the Power icon, and choose Restart. Wait for the computer to fully shut down and then turn it back on.

2. Restart your router: Unplug the power cable from your router, wait for 30 seconds, and then plug it back in. Allow the router to restart completely.

3. Restart your modem: If you have a separate modem, repeat the same process by unplugging the power cable, waiting for 30 seconds, and plugging it back in.

Switching to a Different Web Browser

Some web browsers may have better compatibility with certain websites or networks, so switching could potentially help you bypass the DNS error. Download and install a different web browser to see if this resolves the problem.

See also  Troubleshooting iPhone Not Syncing with iTunes

Before switching, make sure to save any important bookmarks or passwords from your current browser. Once you’ve installed the new browser, set it as your default browser and try accessing the websites that were previously giving you trouble.

If the DNS Server Not Responding error persists even after switching web browsers, you may need to explore other troubleshooting options.

Accessing Websites with Another Device

To access websites with another device, you can try resetting your router by unplugging it for a few minutes and then plugging it back in. Make sure to restart your device as well to establish a new connection. If the issue persists, you can try changing the DNS server settings on your Windows 10 computer.

To do this, go to the Control Panel and click on Network and Sharing Center. Then, click on Change adapter settings and right-click on your network connection. Select Properties and double-click on Internet Protocol Version 4 (TCP/IPv4). Here, you can manually enter a different DNS server address such as Google’s public DNS (8.8.8.8 and 8.8.4.4).

After making these changes, try accessing websites again on your Windows 10 device. If you are still experiencing issues, you may want to consider contacting your Internet service provider or seeking technical support for further assistance.

Updating Your Network Adapter Driver

Network adapter driver update screen

To update your network adapter driver in Windows 10 and potentially fix the DNS server not responding error, follow these steps:

1. Open the Device Manager by pressing the Windows key + X and selecting Device Manager from the menu.

2. Expand the Network adapters section and locate your network adapter.

3. Right-click on your network adapter and select Update driver.

4. Choose to search automatically for updated driver software.

5. Follow the on-screen instructions to complete the driver update process.

6. Restart your computer to apply the changes.

7. Check if the DNS server not responding error persists after updating the network adapter driver. If the issue continues, try other troubleshooting steps.

Flushing the DNS Cache and Resetting IP

To flush the DNS cache and reset the IP on Windows 10, follow these steps. First, open the Command Prompt by searching for it in the start menu. Then, type “ipconfig /flushdns” and press Enter to clear the DNS cache. Next, type “ipconfig /release” and press Enter to release the current IP address.

After that, type “ipconfig /renew” and press Enter to obtain a new IP address from the DHCP server. Finally, restart your computer to apply the changes. This process can help resolve DNS server not responding errors on Windows 10.

Changing Your DNS Server Settings

To change your DNS server settings in Windows 10, first open the Control Panel by searching for it in the Start menu.

Click on “Network and Internet” and then “Network and Sharing Center.”

Next, click on “Change adapter settings” on the left side of the window.

Right-click on your network connection and select “Properties.”

Scroll down and double-click on “Internet Protocol Version 4 (TCP/IPv4).”

Select the option to “Use the following DNS server addresses” and enter the preferred and alternate DNS server addresses provided by your ISP or a reliable public DNS service like Google DNS (8.8.8.8 and 8.8.4.4).

See also  Network Adapter Gateway Solutions

Click “OK” to save your changes and then restart your computer to apply the new DNS server settings.

Disabling Internet Protocol Version 6 (IPv6)

To disable Internet Protocol Version 6 (IPv6) on Windows 10 and potentially fix the DNS server not responding error, follow these steps:

1. Open Command Prompt as an administrator by searching for “cmd” in the Start menu, right-clicking on Command Prompt, and selecting “Run as administrator.”

2. In the Command Prompt window, type the following command and press Enter: “netsh int ipv6 uninstall”

3. Restart your computer for the changes to take effect.

4. Check if the DNS server not responding error has been resolved by trying to access websites on your browser.

5. If disabling IPv6 does not fix the issue, you can re-enable it by typing the following command in Command Prompt and pressing Enter: “netsh int ipv6 install”

6. Restart your computer again to apply the changes.

7. Consider other troubleshooting steps if the DNS server error persists, such as checking your network connection, restarting your router, or contacting your Internet service provider.

Temporarily Turning Off Antivirus and Firewall

To temporarily turn off your antivirus and firewall in Windows 10, follow these steps:

1. Click on the Start menu and open the Settings app.
2. Select “Update & Security” and then click on “Windows Security” from the left-hand menu.
3. Click on “Virus & threat protection” and then on “Manage settings.”
4. Toggle the switch to turn off Real-time protection for your antivirus software.
5. Go back to the Windows Security main page and click on “Firewall & network protection.”
6. Click on your active network (such as “Wi-Fi” or “Ethernet”) and toggle the switch to turn off the Windows Defender Firewall.

Disabling Unnecessary Network Connections

To fix the DNS Server Not Responding error on Windows 10, one important step is to disable unnecessary network connections. First, open the Control Panel and navigate to the Network and Sharing Center. Here, click on Change adapter settings.

Next, right-click on any network connections that are not currently in use and select Disable. This will prevent your computer from trying to connect through those unnecessary connections, potentially resolving the DNS Server error.

Starting Your Computer in Safe Mode

To start your computer in Safe Mode in Windows 10, you can follow these steps:

1. Press the Windows key + R to open the Run dialog box.

2. Type “msconfig” and press Enter to open the System Configuration window.

3. In the System Configuration window, go to the Boot tab.

4. Under Boot options, check the box next to “Safe boot” and select “Minimal.”

5. Click OK and restart your computer to boot into Safe Mode.

Starting your computer in Safe Mode can help troubleshoot various issues, including the DNS Server Not Responding error.

Clearing Network Issues and Resetting DNS Settings

Network settings on computer

To clear network issues and reset DNS settings in Windows 10, follow these steps:

Step 1: Press the Windows key + R to open the Run dialog box.

Step 2: Type “cmd” and press Enter to open the Command Prompt.

See also  Don't Starve Together Server Not Responding Guide

Step 3: In the Command Prompt window, type “ipconfig /flushdns” and press Enter to clear the DNS resolver cache.

Step 4: Next, type “ipconfig /release” and press Enter to release your current IP address.

Step 5: Then, type “ipconfig /renew” and press Enter to obtain a new IP address from the DHCP server.

Step 6: Finally, type “netsh int ip reset” and press Enter to reset the TCP/IP stack.

These steps should help resolve the DNS server not responding error in Windows 10.

Disabling Windows Peer-to-Peer Feature

To disable Windows Peer-to-Peer feature, follow these steps:

Step 1: Press the Windows key + I to open the Settings app.

Step 2: Click on “Update & Security” and then select “Windows Update” from the left pane.

Step 3: Click on “Advanced options” and then select “Delivery Optimization”.

Step 4: Toggle the switch under “Allow downloads from other PCs” to Off.

Conclusion and Summary

After following the steps outlined in this article to fix the DNS Server Not Responding Error on Windows 10, it is important to conclude with a summary of the key points.

To begin with, it is crucial to understand that the Domain Name System plays a vital role in translating domain names into IP addresses for web servers on the World Wide Web. When facing this error, issues with the Transmission Control Protocol, domain names, or connectivity to the network may be the root cause.

Firstly, ensure that your Microsoft Windows system is not experiencing any User Account Control restrictions that may be blocking your access to the DNS settings. Additionally, check for any conflicts with your computer network, hostname, or router settings that may be affecting your internet access.

Next, verify the configuration of your DNS settings and name server information to ensure they are accurate and up to date. Also, consider checking your firewall settings and antivirus software to rule out any potential restrictions that could be causing the error.

If you continue to experience issues, it may be helpful to update your device drivers or try using a different DNS server to see if that resolves the problem. It is also important to consider the possibility of internet censorship circumvention or glitches in your network interface controller that could be causing the error.

FAQ

How do I fix DNS server not responding in Windows 10?

To fix DNS server not responding in Windows 10, you can troubleshoot the issue through the Control Panel by accessing the Network and Sharing Center. From there, select the Troubleshoot problems option, navigate to Additional troubleshooters, choose Internet Connections, and run the troubleshooter.

How do I reset my DNS on Windows 10?

To reset your DNS on Windows 10, you can flush the DNS cache by typing ‘ipconfig /flushdns’ in the Command Prompt after searching for ‘cmd’ in the Start menu.

How do I fix a DNS server problem?

To fix a DNS server problem, you can start by clearing the cache, rebooting your computer, checking hardware and wires, running a wizard, performing an antivirus scan, and checking DHCP. If the issue persists, it may be best to reach out to experts for further assistance.

Was this article helpful?
YesNo