In my search for a solution to the Windows 10 Blue Screen of Death error, I discovered a fix for the Critical Process Died issue.
Recently, Fortect has become increasingly popular as a reliable and efficient way to address a wide range of PC issues. It's particularly favored for its user-friendly approach to diagnosing and fixing problems that can hinder a computer's performance, from system errors and malware to registry issues.
- Download and Install: Download Fortect from its official website by clicking here, and install it on your PC.
- Run a Scan and Review Results: Launch Fortect, conduct a system scan to identify issues, and review the scan results which detail the problems affecting your PC's performance.
- Repair and Optimize: Use Fortect's repair feature to fix the identified issues. For comprehensive repair options, consider subscribing to a premium plan. After repairing, the tool also aids in optimizing your PC for improved performance.
Understanding Critical Process Died on Windows 10
When encountering the Critical Process Died error on your Windows 10 operating system, it can be frustrating and disrupt your work. This blue screen of death (BSOD) indicates that a critical system process has stopped working, causing your computer to crash.
To fix this issue, follow these steps:
1. Boot your computer in Safe Mode by restarting and pressing the F8 key repeatedly before the Windows logo appears. Select “Safe Mode” from the menu.
2. Once in Safe Mode, open the Command Prompt as an administrator.
3. Run the System File Checker (SFC) command by typing “sfc /scannow” and pressing Enter. This command will scan and repair any corrupted system files that may be causing the error.
4. If the System File Checker does not fix the issue, try using the Deployment Image Servicing and Management (DISM) tool. Open the Command Prompt as an administrator and type “dism /online /cleanup-image /restorehealth“.
5. If the above steps don’t resolve the issue, you may need to reinstall Windows 10 using the Windows Preinstallation Environment (WinPE). Follow the instructions provided by Microsoft to perform a clean installation.
Remember to back up your important files and take screenshots of any error codes or messages you encounter during the troubleshooting process. If you’re not comfortable performing these steps yourself, consult a professional for assistance.
Restarting in Safe Mode and Upgrading Drivers
Restarting in Safe Mode:
If you’re experiencing the Critical Process Died error on your Windows 10 PC, restarting your computer in Safe Mode can help identify and resolve any driver-related issues. Safe Mode starts your computer with a minimal set of drivers and services, allowing you to troubleshoot without interference from third-party software.
To restart in Safe Mode, follow these steps:
1. Press the Windows key + R to open the Run dialog box.
2. Type “msconfig” and press Enter to open the System Configuration window.
3. In the System Configuration window, go to the “Boot” tab.
4. Under the “Boot options” section, check the box next to “Safe boot” and select “Minimal”.
5. Click “OK” and then restart your computer.
Upgrading Drivers:
Outdated or incompatible drivers can often cause the Critical Process Died error. Upgrading your drivers can resolve these issues.
To upgrade your drivers, use the Device Manager:
1. Press the Windows key + X and select “Device Manager” from the menu.
2. In the Device Manager window, expand the categories to find the device with the driver issue.
3. Right-click on the device and select “Update driver”.
4. Choose the option to search automatically for updated driver software.
5. Follow the on-screen instructions to complete the driver update.
Using SFC /Scannow and Running DISM to Repair System Image
Using SFC /Scannow and Running DISM to Repair System Image
If you’re experiencing the “Critical Process Died” error on your Windows 10 computer, it can be frustrating and disrupt your workflow. Fortunately, there are steps you can take to resolve this issue. Two helpful tools are the System File Checker (SFC) and the Deployment Image Servicing and Management (DISM) tool.
SFC /Scannow: This command-line tool scans your computer for any corrupted system files and replaces them with the correct versions from Windows File Protection. To run SFC /Scannow, follow these steps:
1. Press the Windows key + X and select “Command Prompt (Admin)” or “Windows PowerShell (Admin).”
2. In the command prompt window, type sfc /scannow and press Enter.
3. Wait for the scan to complete. If any issues are found, they will be repaired automatically.
DISM: The DISM tool is used to repair the Windows image, which includes the operating system files. To run DISM, follow these steps:
1. Open a command prompt as an administrator.
2. In the command prompt window, type dism /online /cleanup-image /restorehealth and press Enter.
3. Wait for the process to complete. It may take some time.
Once you’ve completed these steps, restart your computer and check if the “Critical Process Died” error has been resolved. If not, further troubleshooting may be required.
Performing a Clean Boot and Uninstalling Recent Software
- Performing a clean boot: A clean boot helps determine if a software conflict is causing the “Critical Process Died” error. It starts Windows with a minimal set of drivers and startup programs to identify the problem.
- Uninstalling recent software: Removing recently installed software can be an effective solution if the “Critical Process Died” error occurred shortly after installation. This helps eliminate potential conflicts and allows Windows to run smoothly.
Restoring to a Previous Point and Using MiniTool Partition Wizard for Bad Sectors
Restoring to a Previous Point:
If you encounter the “Critical Process Died” error on your Windows 10 system, you can try restoring your computer to a previous point to fix the issue.
To do this, follow these steps:
1. Press the Windows key + R to open the Run dialog box.
2. Type “rstrui.exe” and press Enter to open the System Restore window.
3. Click “Next” and select a restore point that was created before the error occurred.
4. Follow the on-screen instructions to complete the restoration process.
Using MiniTool Partition Wizard for Bad Sectors:
If you suspect that bad sectors on your hard drive are causing the “Critical Process Died” error, you can use MiniTool Partition Wizard to check and repair them.
To do this, follow these steps:
1. Download and install MiniTool Partition Wizard from the official website.
2. Launch the program and select the disk that you want to check for bad sectors.
3. Click “Surface Test” in the toolbar and then click “Start Now” to begin the scanning process.
4. Wait for the scan to complete and check the results. If any bad sectors are found, click “Fix Now” to repair them.
Checking and Repairing Bad Errors in Hard Drive
- Run a Disk Check: Use the built-in Windows utility, CHKDSK, to scan and repair bad sectors on your hard drive.
- Update Device Drivers: Outdated or incompatible drivers can cause critical errors. Ensure all your drivers are up to date.
- Perform a System File Check: Use the SFC command in Command Prompt to scan for and fix any corrupted system files.
- Check for Memory Issues: Run Windows Memory Diagnostic tool to identify and resolve any memory-related problems.
- Scan for Malware: Run a full system scan with a reliable antivirus software to eliminate any malicious programs that might be causing the issue.
- Disable Overclocking: If you have overclocked your system, revert it back to default settings as it can lead to instability and critical errors.
- Check for Hardware Problems: Inspect hardware components such as RAM, motherboard, and hard drive connections for any physical damage or loose connections.
- Uninstall Recently Installed Software: If the error occurred after installing new software, try uninstalling it to see if it resolves the issue.
- Restore the System: Use System Restore to roll back your computer to a previous state when it was functioning properly.
- Perform a Clean Boot: Temporarily disable all non-essential startup programs and services to troubleshoot any software conflicts.
Making a Backup for Important Data on Disk in Windows 10
- Open File Explorer by clicking on the folder icon located on the taskbar or by pressing the Windows key + E on your keyboard.
- Navigate to the location where your important data is stored.
- Select the files and folders you want to back up by clicking and dragging your mouse over them, or by holding down the Ctrl key and clicking on each item individually.
- Right-click on one of the selected items and choose Copy from the context menu.
- Go to the location where you want to store the backup, such as an external hard drive or a cloud storage service.
- Right-click in the destination folder and choose Paste from the context menu.
- Wait for the files and folders to be copied to the backup location. This may take some time depending on the size and quantity of the data.
- Once the backup is complete, verify that all the files and folders have been successfully copied.
- If desired, create a compressed archive of the backup files to save disk space or for easier transfer/storage.
- Label the backup with a clear and descriptive name, including the date of the backup, to easily identify it in the future.
Quick Fixes: Repairing Windows OS with Fortect and Running Virus Scan
If you’re experiencing the critical process died error on your Windows 10 computer, don’t worry – we’ve got you covered. Follow these steps to fix the issue and get your system back up and running smoothly.
1. Boot your computer into Safe Mode by following these steps:
– Press the Windows key + R to open the Run dialog box.
– Type “msconfig” and hit Enter.
– In the System Configuration window, go to the Boot tab.
– Under Boot options, check the “Safe boot” box and select “Minimal”.
– Click OK and restart your computer.
2. Once in Safe Mode, open the Fortect application and run a full system scan to check for any viruses or malware.
3. After the scan is complete, follow these steps to repair your Windows OS:
– Press the Windows key + X and select “Command Prompt (Admin)”.
– In the Command Prompt window, type “sfc /scannow” and hit Enter.
– Wait for the scan to finish and then restart your computer.
4. If the issue persists, you can try running a DISM scan to repair any corrupted system files. Open Command Prompt as an administrator again and type “dism /online /cleanup-image /restorehealth” and hit Enter.
Updating Device Drivers and Undoing Recent Changes
To fix the Critical Process Died error on your Windows 10 computer, it may be necessary to update your device drivers and undo any recent changes that could be causing the issue. Follow the steps below to do this:
1. Updating Device Drivers:
– Press the Windows key + X and select “Device Manager” from the menu.
– In the Device Manager window, expand the categories and locate the device with the driver you want to update.
– Right-click on the device and select “Update driver.”
– Choose the option to automatically search for updated driver software.
– If Windows finds any updates, follow the on-screen instructions to install them.
– Restart your computer after the driver update is complete.
2. Undoing Recent Changes:
– Press the Windows key + X and select “Control Panel” from the menu.
– In the Control Panel window, click on “Programs” and then “Programs and Features.”
– Locate the recently installed software or driver that could be causing the issue.
– Right-click on the program and select “Uninstall” to remove it.
– Restart your computer after the uninstallation process is complete.
By updating device drivers and undoing recent changes, you can resolve the Critical Process Died error and bring stability back to your Windows 10 system.
Running SFC and DISM for System Repair
Running the System File Checker (SFC) and Deployment Image Servicing and Management (DISM) tools can help fix the “Critical Process Died” error on Windows 10. To begin, open the Command Prompt as an administrator. Type sfc /scannow and press Enter to start the SFC scan. This tool will scan and repair any corrupted system files. Wait for the scan to complete, and then restart your computer.
If the SFC scan doesn’t resolve the issue, you can run the DISM tool. In the Command Prompt, type dism /online /cleanup-image /restorehealth and press Enter. DISM will repair any issues with the Windows image, using Windows Update as a source. This process may take some time, so be patient. Once it’s finished, restart your computer again.
After running both SFC and DISM, check if the “Critical Process Died” error has been resolved. If the issue persists, you may need to seek further assistance or consider other troubleshooting steps.
Last Resort: Refreshing or Resetting Windows 10
If you’re encountering the “Critical Process Died” blue screen error on your Windows 10 device, refreshing or resetting your operating system can help resolve the issue. Here’s how you can do it:
1. Refreshing Windows 10:
– Go to the Start menu and click on “Settings.”
– Select “Update & Security” and then click on “Recovery.”
– Under “Reset this PC,” click on “Get started.”
– Choose the “Keep my files” option to refresh Windows 10 without losing your personal files. Follow the on-screen instructions to complete the process.
2. Resetting Windows 10:
– Follow the same steps as above until you reach the “Reset this PC” screen.
– This time, select the “Remove everything” option to reset Windows 10 completely. Note that this will remove all your personal files, apps, and settings.
– Follow the on-screen instructions to finish resetting Windows 10.
